Otherwise, there are several ways to connect the IPĬamera to your Wi-Fi network. If you want to use wired connection, you just need to connect the Ethernet cable. To the network and find IP address 1.1 Connect camera to the network If you have finished these basic steps before, Manufacturer for all camera-related issues and contact us only forĬameraFTP-related (cloud service / FTP) issues. It may not be accurate or completely up-to-date. The information provided isīased on our knowledge of the models Wanscam JW0004 Cameras. Replace the product manual from the manufacturer. IR LEDs for Night Vision Up to 30 feet distance for 24-hour surveillanceīasic camera information Video / image resolution.Does not support H.264 video/audio recording by itself, but can be supported via CameraFTP VSS.Continuous image recording to FTP server at a max frequency of 1 image/s.Motion detection with cloud image recording to FTP server.Easy WiFi Configuration via a network cable and web browser.Supports both wired and wireless connection, but not PoE.Two-way audio, Remote Pan/ Tilt rotate, indoor use.Supports 640x480 video resolution with up to 30 fps.Newer models might have added H.264 video recording feature. The camera model JW0004 that we tested is a little old and can only support 640x480 image recording. In general, we believe Wansview is better suited for cloud recording than Wanscam. Wanscam network cameras are usually compatible with CameraFTP cloud recording service. Configure Video Profile and Image/Video Recording OptionsĤ.1 Configure Video / Image Settings (Resolution, Frame Rate, Bit Rate) Step 2: Configure the Camera Using the Web-based Configuration Tool Step 1: Connect camera to the network and find IP address Camera for Cloud Recording, Monitoring and Playback

Wanscam cant find search tool